Phụ Gia Da Giầy (Auxiliary)

Well emulsifying capacity and can be used in leather degreasing

Period of validity:12 month

Help to acrylic acid retanning agent penetrating into leather ,5-10%， 0.1-0.5%JFC(%based on shaved weight)

Soaking :0.2%-1.0%（based on salted hide weight）
Liming:0.2-0.8%（based on salted hide weight）
Deliming、Bating、pickling：0.1-0.3%（based on limed hide weight）
Dyeing:0.2-0.5%（based on shaved weight）
Blue soaking back：0.1-0.5%（based on shaved weight）
Tan、Retan：0.1-0.3%（based on shaved weight）
Dried hide soaking back：1.0-1.5%（based on dried hide weight）
Help to acrylic acid retanning agent penetrating into leather ,5-10%， 0.1-0.5%JFC(%based on shaved weight)

Organic amine mixture

Appearance：yellowish liquid
pH（10% solution）:9.0~11.0
Solid content(mass ratio %)：≥45.0

Effective control the swell of liming.

Enhance the solubility of lime and accelerate the penetrating of lime liquor.

Promoting dispersing of collageous fibre ,Make the pelt softer and decrease risk of grain loosing.

Effective get rid of the dirt of pelt, and possess crease-resistance capability.

 

Package: net weight 120kg ， plastic or steel barrel ；

Reserve: under the shady ， cool and dry place, recommended storing temperature:5~40 ℃

Period of validity:12 month

It has strong corrosive and would not touch with skin.

Unhairing with liming ， HS 0.6-1.2% （ based on salted weight ） .

HS can be added once before the use of curing agent or use in liming and unhairing in company with unhairing agent.

Liming by low sulfur and saving hair: HS 1.0~1.5% , Lime 1.5~2.0% pretreatment for 40~60 minutes and then use sodium sulfide.

Liming by low sulfur and destroying hair ： HS 1.2~1.5% , can decrease applied quantity of Sodium sulfide by 10~15%.

reliming : 0.3-0.5% HS with lime and/or 0.1~0.3 sodium sulfide will make the limed hide more clean.

Paddle and paint unhairing : HS 0.6-1.2% （ based on hide weight ）

Mixture of anionic and non-ionic surfacetant

Appearance ： milk-white or yellowish dense liquid

pH （ 10% solution ）： 11.0~13.0

Solid Content(mass ratio %): ≥ 13.0

Ionized state ： negative ion

Storage stability ： H608 become more slimydense in low temperature , but after thawing at usually condition its performance will not be changed .

Excellent emulsifying capability ， effective degreasing.

Excellent wetting and dispersing capability.

 

net weight 120kg ， plastic barrel ；

period of validity ， 12months

Storing temperature and recommended:5~40 ℃ .

H608 can be used in universal processes , but can’t be used in strong acid , strong cationic bath and chrome bath . The dosage recommended:

Soaking 0.5-1.0% （ based on wet salted hide weight)

Deliming 0.3-1.0% 　（ based on limied hide weight ）

Degreasing 1.0-3.0% （ based on wet salted hide weight)

Bating 0.5-1.5% 　（ based on limied hide weight ）

Liming 0.5-1.0% （ based on wet salted hide weigh ）

Dried hide soaking back 1.0-1.5% （ based on dried hide weight ）

Ethylene oxide additive product

Appearance: A colorless or light yellow liquid

pH （ 10% solution ） :6.0-8.0

Solid content(mass ratio %): ≥ 60.0

Ionized state :non-ionic

Storage stability ： H900 is viscid liquid in low temperature , thawing with usually way , the performance will not be not changed.

Excellent penetrating , dispersing ， wetting ， and degreasing capability.

H900 can improve the effect of soaking and liming , help to dispersing of chemicals in soaking and liming ,and can prevent the lime depositing.

H900 can degrease effectively , improve distributing of grease in leather and prevent grease from transfer to the face of hide or equipment .

H900 can be used in acid , alkali , salt and electrolyte bath .

H900 can improve the effect of soaking back and improve the eveness of hide.If enhance the dosage of H900, the fatliquoring eveness of hide will be improved .

H900 used with H608 or JFC will improve effect of degreasing.

H900 has no blight to non-ionic , negative ion , amphoteric assistants and enzyme .

H900 has weakly affinity with fibre and can be scour off easily .

 

net weight 105Kg, plastic barrel ；

period of validity: 12months,Storing temperature and recommended:5~40 ℃ .

H900 can be used to degreasing , damping , dispersing and washing and unhairing of hide. The dosage recommended(%based on salted wet hide weight ):soaking 0.2~0.5% , liming and paint 0.3~1.0% , reliming 0.2~0.6% ; deliming, bating 0.2~2.0%(based on pelt weight).

Soaking back and degreasing : H900 0.2-1.0%(based on shaved leather).

H900 can be used to degreasing of raw hide with abundant fattiness(for example: sheep skin and pig skin ). H900 can be used with H901 , H608 , soda ash and/or solvent. The dosage recommended :0.5~2.0% (based on raw hide weight).Degreasing with solvent : H900 1.0-2.0% and solvent 2.0-5.0% （ based on raw hide weight ） .

Ethylene oxide additive product

Appearance : A colorless or lightly yellowish liquid

pH （ 10% solution ） :7.0-9.0

Solid content(mass ratio %): ≥ 60.0

Ionicity: non-ionic

Storage stability ： H900 is viscid liquid at low temperature ,when the frozen solid thawed with usually way , the performance will not be not changed.

H901 has excellent emulsifing, dispersing, wetting and degreasing capability .

H901 can improve effect of soaking and liming , help chemical to dispersing and penetrating in soaking and liming processing and can prevent ash from aggrading on the face of skin.

H901 can degrease effectively and improve stability of the emulsion .

H901 can be used in acid , alkali , salt , metal complex dyes and as well electrolytical bath .

H901 can improve the effect of soaking back and eveness of blue hide. using H901 in a high concentration ,will homogenize the effect of fatliquoring and improve anionic dyestuff penetrating and level dyeing property.

H901 used with H608 or JFC can improve effect of degreasing.

H901 has no blight to non-ionic , negative ion , amphoteric assistants and enzyme .

H901 has weakly affinity with fibre and can be scour off easily .

 

150kg plastic barrel ；

Storing temperature and period of validity recommended:5~40 ℃ , 12months.

Before application of H901,it is preferable to dissolve it with 40-50 ℃ warm water.

H901 is fit to all kinds of process of tanning and not limited under acid and alkali condition.

H901 can be used to degreasing , wetting , dispersing and promoting penetrating , the dosage recommended:

Soaking:0.2~0.5%(based on wet salted hide weight)

Liming and paint :0.3~1.0% (based on wet salted hide weight)

Reliming:0.2~0.6%( based on wet salted hide weight)

Deliming or bating :0.2~2.0% （ based on raw hide weight ）

Pickling:0.3~2.0% （ based on raw hide weight ）

Soaking back or degreasing of wet blue: 0.2~0.6%(based on shaved leather weight)

When a deep penetrating dyeing is needed, 1% H901 will be used with neutralizing agent for neutralizing retanning and then transfer to dyeing procedure.

H901 can be used to degreasing of raw hide with abundant fattiness(for example: sheep skin and pig skin ). H901 can be used with H608,soda ash and/or solvent.

The dosage recommended :0.5~2.0% (based on raw hide weight).Degreasing with solvent : H900 1.0-2.0% and solvent 2.0-5.0% （ based on raw hide weight ） .The degreasing can be carry out for several times.

Aliphatic Ethylene oxide additive product

Appearance:clear to light yellow dense liquid

pH solution(10% solution ) 7.0-9.0

Solid content( mass ratio %):≥35.0

Ionized state :non-ionic

Shelf life:high viscosity under low temperature , ice-out before use .

H902 doesn’t contain the harmful compositon of APEO forbidden internationally.it has nice degreasing ,emulsifying capability and obvious dispersing , wetting and leveling effect . it is a kind of safe ,convenient and high quality degreasing agent and multifunctional auxiliaries.

H902 can improve the effect of soaking ,liming and other processes , help the chemical materials to dispersing and penetrating.

H902 is a kind of non-ionic degreasing agent , so it has great stability to acid ,base,salt ,electrolyte,hard water and metal dyes and can be applied in various processes.

H902 can accelerate and improve the mellowing ,degreasing and equalizing of wet-blue .it can increase the penetration of anionic dyes and improve the leveling property of dyeing and can eliminate the uneven fat-liquoring phenomena when being used in greater quantity.

H902 has no negative effect on cationic , anionic ,non-ionic or amphoteric assistants and enzyme .it can be scoured off easily because it has no associative ability to fiber ,and the emulsified grease will not remain in exhaust and equipment.

 

Net weight 150kg / barrel

Storing in 40-50℃ shady and dry, protection against the dampness

Period of validity: 12 months

H902 is suitable to every leathermaking process and not limited by pH .the processes and practical dose depend on the hide ,blue ,crust, processing procedures and hide curing conditions as well as the requirement of the process and the type of the leather manufactured.

The suggestion dose for H902 used in usual degreasing , soak ing ,dispersing and accelerating penetration is 0.3-2.0%.

Example of Applications

based on the weight of wet salt hide ( %)

soaking 0.3-0.5%

Liming 0.3-1.0%

Reliming 0.3-0.6%

Based on the weight of pelt (%)

Deliming and softening 0.3-2.0%

Pickling 0.3-2.0%

H902 can be used to degrease the raw hide with high natural fat(for example ship skin and pig skin).it can be used with H608,H901 and soda ,JFC or solvent to degrease by several processes. The suggestion dose for H902 is 0.6-2.0%(by weight of raw hide).Degreasing with solvent :1.5-3.0% H902 and 2.0-5.0% solvent (by weight of pelt) or multirunning degrease.

In order to degrease completely ,H902 should be used in higher temperature .when being used in lower temperature processes ,it should be dissolved with 40-50℃ water and cool down before use .it is suggested that the hide should be washed several times by warm water after being degreased .it is also suggested that suitable mechanical action be carried out among degreasing .

organic acid compound

Appearance : A white to light gray powder

pH solution (10% solution ):8.0-9.0

solid content( mass ratio %):≥96.0

HR is a kind of reactive fixating agent for chrome tanned leather and it doesn’t contain chrome.It can enhance the binding power between chrome and fiber ,improve the absorptivity of chrome ,decrease the use of chrome tanning agent and has some effect of basification.

HR is suiltable for all chrome-tanned leather ,it has no special requirement for soaking and liming before chrome -tanning process but the liming must be thoroughly completed, especially for a thick and tight pelt .

The liquor ration in tanning process should be small when use HR tanning system .First add chrome powder into drum ,run until the chrome penetrate completely , add HR into drum ,run at least 60min, then continue as usual processes.The total action time of HR is 8-12h.If the hide cann’t be fish out immediately after tanning ,the drum should hold running 10min/h or cool the drum temperature down to normal temperature by filling into enough water and run 15-20min ,otherwise chrome stain will form on leather and the crust would become wrinkled.

The blue tanned with chrome tanning agent with HR has light ,bright colour ,tight grain and plump feeling.

 

Net weitht 20kg/bag ；

Storing in a shady and dry place, avoid the dampness

Period of validity: 24months

It is mainly used in the later chrome tanning process and the dose is 0.2-0.5% weight by pelt.It is especially used in the tanning and chrome retanning process of low-grade and empty hide.

The conditions for higher absorption of chrome in normal dosage :1)small liquor ration,2)the end pH of tanning is among 3.9-4.2;3)the end temperature of bath liquid is among 40-42 ℃ ;4) the total tanning time is 12h,at least not less than 9h;5) add HR as powder directly;6)the bath temperature should not higher than 30℃ before adding HR.

It is suggested that the blue should be washed by water of normal temperature(150% water ,25℃,run 5-10min)before fishing out if the blue will be stored for a period of time.